home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Library
/
RoseWare - Network Support Library.iso
/
drivers
/
ps22is.exe
/
PS22IS.TXT
next >
Wrap
Text File
|
1993-09-17
|
4KB
|
103 lines
NOVELL TECHNICAL INFORMATION DOCUMENT
TITLE: PS2ISCSI.OBJ v1.14 Embedded SCSI driver
DOCUMENT ID: TID000514
DOCUMENT REVISION: A
DATE: 09AUG93
ALERT STATUS: Yellow
INFORMATION TYPE: Symptom Solution
README FOR: PS22IS.EXE
NOVELL PRODUCT and VERSION:
NetWare 2.2
ABSTRACT:
This driver is only for the internal IBM SCSI controller and does not
support the external BUS type cache or non-cache controllers. Also it
cannot be loaded (at this time) with any other PS2SCSI driver (Channel 0
only) or the PS2ESDI driver.
_________________________________________________________________
DISCLAIMER
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL.
NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION.
HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
ONLY. NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
INFORMATION.
_________________________________________________________________
Self-Extracting File Name: PS22IS.EXE
Files Included Size Date Time
PS22IS.TXT (This File)
PS2ISCSI.OBJ 7656 9-29-92 5:00p
PS2ISCSI.DSK 572 2-24-93 9:19a
This README file of PS22IS.EXE accompanies PS2ISCSI.DSK, PS2ISCSI.OBJ for
NetWare v2.2. This file is an update to PS2M57.ZIP dated 07-08-92 with
size 5909 bytes.
The following files are included:
PS2ISCSI.DSK 572 02-24-93 9:19a (NetWare v2.2)
PS2ISCSI.OBJ 7656 09-29-92 5:00p v1.14 (NetWare v2.2)
PS22IS.TXT (This File)
SCSI DRIVERS FOR THE PS/2 MODEL 56, 57, 76, 77 and 85.
These drivers have been tested only with the internal (MotherBoard) host
adapters and internal drives of the PS/2 Models 56, 57, 76, 77 and 85.
This updated SCSI disk driver, version (1.14) for NetWare v2.2, addresses
several problems with the earlier version (1.1) of this driver. They are:
1) Version 1.1 exhibited problems with a CDROM on a Non-Dedicated 2.2
server.
2) Version 1.1 would not show the correct controller number within
Fconsole.
3) A loss of disk space or problems with partitioning would result from
the use of disk driver version 1.1 because the correct number of heads was
not passed to the operating system.
4) Version 1.1 is unable to recognize internal (MotherBoard) SCSI
controller on the new IBM PS/2 systems.
INSTALLATION:
To INSTALL this version of the IBM PS/2 SCSI driver:
1) Copy PS2ISCSI.DSK to the SYSTEM-1 diskette or subdirectory.
2) Copy PS2ISCSI.OBJ to the SYSTEM-2 diskette or subdirectory.
2) Run INSTALL and select IBM PS/2 Built in (MotherBoard) SCSI Disk
Driver V1.14. Regenerate and install the operating system as you normally
would.
***** IMPORTANT NOTE: ******************************************
This driver is only for the internal IBM SCSI controller and does not
support the external BUS type cache or non-cache controllers. Also it
cannot be loaded (at this time) with any other PS2SCSI driver (Channel 0
only). This means that if you want to use the internal (embedded) scsi
port with this driver, you will not be able to use an IBM scsi, cache or
non-cache, host bus adapter (this driver will NOT co-exist with the
pss2esdi driver at present). Later versions may permit the co-existence of
this driver and the HBA driver.
****************************************************************
CAUTION
ALWAYS backup your system before implementing any program/utility revision
involving the low-level functions of NetWare including re-linking of
operating system .OBJ files, Bindery utilities, drive and volume operation,
etc.
****************************************************************